Pro Audio - Amplifier Accessories Product Listings

34 Products

Atlas - Channel Support Mounting Rails 47.75" (Pair).

Model: 180-4 Brand: Atlas

Install 180-4 channel bars in suspended ceilings as an economical means of supporting loudspeaker assemblies. Pre-drilled holes provide for easy installation in any type of protective enclosure or plaster frame. Model 180-4 is constructed of gal...

MSRP: $21.99

Bose - CARDPowerMatch Dante Network Card

Model: 359844-0020 Brand: Bose

The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate. Eight output channels are available for diagnostic m...

Call for Price

Atlas - AMP, MIXER 6CH INPUT 240W with Global Power Supply

Model: AA240G Brand: Atlas

The AA240G is a 240 Watt six input multi load impedance mixer amplifier that is engineered with many unique features to assist the contractor or installer in today's commercial business audio environment. It is designed for distributed paging an...

MSRP: $1,391.99

Atlas - RACK MOUNT KIT FOR 1 OR 2 AA35G OR AA60G AMPLIFIERS

Model: AAGRMK2 Brand: Atlas

The AAGRMK2 Rack Mount Kit provides mounting of 1 or 2 (side-by side) of AtlasIED's new AA35G and/or AA60G amplifiers in standard 19" equipment rack. Includes all parts an hardware for 1 AA35G/AA60G or 2 AA35G/AA60G. Two connector plates are pro...

MSRP: $55.99

Atlas - Rack Mount Kit for (1) AA120/AA240 or (1) AA120M

Model: AARMK2-0 Brand: Atlas

The AARMK2-0 Rack Mount Kit provides mounting of Atlas Sound's new AA120, AA240, and AA120M Mixer amplifiers in standard 19" equipment rack.

Product Features:

Device Supported: Amplifier
Product Color: Black
Height: 3.5"

MSRP: $56.99

Atlas - 15A Half Width Rack Power Conditioner with Remote Activation

Model: AP-S15RTHR Brand: Atlas

The AP-S15RTHR has been designed to fit into Atlas half width equipment racks. The AP-S15RTHR meets or exceeds most installation requirements for AC power distribution and equipment power protection. The AP-S15RTHR design offers power management... control, remote activation, 24VDC 2000mA output, noise filtering, spike/surge protection and six AC outlets making it the most compact, cost effective power management protection system on the market today. The AP-S15RTHR features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products. EMI filters are incorporated to reduce noise and Electromagnetic Interference (EMI) from such items as electric motors and external switching power supplies. The benefit of these filters can be seen on video products and heard audibly by reduced static pops and external signal interference. The AP-S15RTHR can be remotely activated by using dry contact closure or via a 5V 24VDC voltage. Either method can be triggered by using one of the optional Atlas WPD wall plate switches that feature a custom label area and remote status LED. The AP-S15RTHR also features a 24VDC 2000mA DC output that works in conjunction with the switched AC Outlets. This 24VDC output provides enough current to power several Time Saving Device (TSD) preamps, mixers or amplifiers reducing or eliminating the need for external DC power supplies. For fire alarm requirements an Emergency Power Down function or EPD can also be created by using the Remote Activation feature by simply keeping the Remote Activation contact closed until a condition occurs that requires a system shut down. When the contacts are open, it will remove power from the switched outlets. The AP-S15RTHR is unique by allowing you to select the power cord length that is required for the installation. A removable 12' IEC power cord with a retainer bracket is supplied with the unit. The AP-S15RTHR is designed to be mounted in a half width rack, but can also be rack mounted into 19" equipment racks by using the optional PA702RMK kit. This kit allows you mount an AP-S15RTHR by itself or in conjunction with another Atlas half width rack product such as the DPA-102PM, PA40G/PA60G, or MA40G/MA60G in a 19" 1RU space

MSRP: $285.99

Atlas - 100W Single Gang Stainless Steel 70.7V Commercial Attenuator

Model: AT100 Brand: Atlas

High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten make before ...

MSRP: $47.99

Atlas - Deluxe Decora Plate Mounted 100W Attenuator, 3dB Steps

Model: AT100D Brand: Atlas

Decora style High-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten...

MSRP: $52.99

Atlas - Deluxe, Rack Mounted 100W Attenuator, 3dB Steps

Model: AT100-RM Brand: Atlas

The Atlas Sound AT100-RM Rack Mounted 100W Attenuator is designed to provide the attenuation convenience of rack-mounted equipment in cabinets and consoles. It has a matte black polycarbonate dial scale overlay with adhesive backing replaces the...

MSRP: $44.99

Atlas - Deluxe Decora Plate Mounted 10W Attenuator, 3dB Steps

Model: AT10D Brand: Atlas

Decora style high-quality auto transformer series provides the advantages of excellent frequency response, low insertion loss and reliable performance for volume control application in 25 and 70.7-volt systems. Attenuation is accomplished in ten...

MSRP: $40.99

Atlas - Deluxe Priority, Plate Mounted 10W Attenuator w/Priority Relay, 3dB Step

Model: AT10-PA Brand: Atlas

Priority paging feature by-passes the attenuator dial setting to provide full program level to the loudspeakers. Option is available on all AT attenuators. The SPDT relay is operated with 24 VDC at 10mA. Includes protective relay cover to insure...

MSRP: $52.99

Atlas - Deluxe Deco Plate Mounted 35W Attenuator, 3dB Steps,

Model: AT35D Brand: Atlas

MSRP: $47.99

Atlas - Deluxe, Rack Mounted 35W Attenuator, 3dB Steps

Model: AT35-RM Brand: Atlas

For attenuation convenience of rack-mounted equipment in cabinets and consoles, the AT attenuators are available without mounting plate for rack panel installation. Attractive matte black polycarbonate dial scale overlay with adhesive backing re...

MSRP: $40.99

Atlas - Atmosphere Remote XLR Input

Model: A-XLR-US Brand: Atlas

The Atmosphere A-XLR is a remote XLR audio input to an Atmosphere AZM audio processor. This expansion acts identically to the on-board mic/line inputs. The AZM will automatically detect the A-XLR and dynamically assign appropriate audio settings...

MSRP: $234.00

Atlas - Atmosphere Remote XLR Input -Black

Model: A-XLR-US-B Brand: Atlas

MSRP: $234.00

Atlas - CP700 Rear Rack Rail Mounting Kit

Model: CP700RRK Brand: Atlas

The CP700RRK Rear Rack Mount Kit provides rear mounting support of Atlas Sound's new CP700 amplifier in standard 19" equipment rack. This unique mounting system will accommodate rack depths from 18.5" to 36".

Product Features:

Device Supported: Amplifier
Maximum Adjustable Depth: 36"
Product Color: Black

MSRP: $95.99

Atlas - IED 2x2 Ceiling Mount Rack with 2RU, Standard width, AmbiTILT Shelf

Model: CR222-NR Brand: Atlas

The CR222-NR ceiling-mounted equipment rack allows electronic equipment to be conveniently installed out of sight, in the ceiling plenum. The CR Series provides a space-saving solution while also being aesthetically discrete, blending in with co... mmon drop-ceiling tile designs. They permit equipment to be securely mounted above the ceiling in a sealed UL plenum-rated cabinet with an easy access door. The door assembly has an open frame design so the installer can place a ceiling tile into the frame and better conceal the entire ceiling rack. The ceiling tile cut-out is safely held in place by retainer tabs, locking it to the frame. To open the door, two retention thumb screws can be removed, and the door has attached safety cables to protect against injury. The CR222-NR provides 2RU (rack units) with a 19" standard-width. The enclosures are 2' x 2' to fit a standard reflected ceiling tile grid. The shelf system has universal mounting holes to easily bolt or tie down electronic devices. As an option, a rack rail kit can be purchased for installing rack mount installable electronic equipment. The optional CR222RR rack rail provides two rack units (2RU) AmbiTILT - Easily load and service equipment An AtlasIED advantage is the AmbiTILT mechanism with three methods to easily load and service equipment. For the first method, the shelf system has quick-release cane bolts. The two-(2) front cane bolts can be released and the entire shelf will tilt down towards the front. The shelf assembly is held in place by two safety cables and the two rear cane bolts. Being an ambidextrous design, the two-(2) rear cane bolts can be released in the same fashion and the rear section of the shelf will tilt downward for quick access to equipment's rear connectors. The third option allows an integrator to completely remove the entire shelf system by releasing the front and rear cane bolts followed by releasing the two safety cables via the quick-release locking pins. Integrated AC Power Pack The CR222-NR incorporates an integrated UL-listed power pack for powering the mounted electronic devices and data projector. There are five-(5) electrical outlets provided with standard 15 Amp Edison-style plugs. Four-(4) electrical outlets are located inside the cabinet and one-(1) outlet faces down and remains exposed when the door is shut. This allows a projector to be easily powered. The CR222-NR does not include PowerAWAKE technology. All the outlets are turned on or off by the exposed on/off switch. The power supplies incorporate a whisper quiet fan assembly (24dBSPL A-weighted) for equipment cooling. Multiple Punch-Outs for Electrical and A/V Connectors The CR222-NR is built "Texas Tough" in AtlasIED's Texas-based manufacturing facility. Proudly made in America and built to last, 18AWG powder coated metal provides a strong and rigid assembly with decades of operational use. Another AtlasIED advantage, the cabinet side panels include four-(4) removable 4" square standard cover plates. There are two per side and each side has one cover plate with a single 11/2" knockout and the other plate with two double knockouts for 1/2" or 3/4" conduit connection. The provided cover plates can be replaced with an installer-provided custom plate with connectors such as an Ethernet jack, HDMI jack, NL4, XLR, RCA connectors and much more. Multiple Installation Mounting Options AtlasIED provides three mounting methods

MSRP: $1,144.99

Atlas - IED rack rail kit 2x2 ceiling rack

Model: CR222RR Brand: Atlas

The optional CR222RR rack rail kit can be purchased for installing rack mountable electronic equipment into the AmbiTILT shelf system. The CR222RR provides two rack units (2RU)

Product Features:

Device Supported: Electronic Equipment
Application/Usage: Rack
Application/Usage: Shelf

MSRP: $81.99

Atlas - CR Series Optional Threaded Rod Installation Kit for CR222 Versions

Model: CR222TRK Brand: Atlas

The optional CR222TRK kit provides two brackets so the CR enclosure can be suspended via threaded rod. The CR222TRK brackets have supplied holes for threaded rod and nuts to be installed from the structure to the CR enclosure.

Product Features:

Compatibility:
AtlasIED CR222 Versions
Limited Warranty: 5 Year
2 brackets included

MSRP: $43.99

JBL - Wall Controller w/2-Position Source Selector & Volume Control;US Version

Model: CSR-2SV-BLK Brand: JBL

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 connec...

MSRP: $101.11

34 Products