JBL - Pack of 6 pcs of 4" Backcans for CSS8004

Model: CSS-BB4X6 Brand: JBL

The CSS-BB4x6 from JBL is a 4" backcan designed to fit the CSS8004 for in-ceiling installations.

Product Features:

• Compatible with CSS-8004 speaker, CSS-TR4/8 tile rails
• Made of steel, zinc-plated, powder-coated
• Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed loudspeaker

JBL - Pack of 6 pcs of 8" Backcans for CSS8008 or CS8018

Model: CSS-BB8X6 Brand: JBL

The CSS-BB8x6 from JBL is a 8" backcan designed to fit the CSS8008/8018 for in-ceiling installations.

Product Features:

• Compatible with CSS-8008/8018 speaker
• Made of steel, zinc-plated, powder-coated
• Suitable for use in air handling spaces per UL1480, UL2043, NFPA 90 & NFPA 70, when installed with corresponding UL Listed loudspeaker

JBL - Pack of 12 pcs Tile Rails for CSS-BB4 and CSS-BB8 Backcans

Model: CSS-TR4/8X12 Brand: JBL

The CSS-TR4/8x12 Tile Rails from JBL are designed to support the CSS-BB4x6 and CSS-BB8x6 backcans when installing speakers in tiled ceilings.

Product Features:

• Device Supported: Speaker
• Product Material: Steel
• Height: 23.6"

JBL - EON ONE Compact 5v to 12v USB Power Supply

Model: EONONECOMPACT-512V Brand: JBL

Product Features:

• First End Connector Type: USB Type A
• Second End Connector Type: 5.5mm
• Device Supported: Wireless Microphone System

JBL - EON ONE COMPACT BATTERY

Model: EONONECOMPACT-BATT Brand: JBL

Be prepared for any gig and increase the run time of an EON ONE Compact system with additional EON ONE Compact rechargeable batteries. Each lithium-ion battery provides up to 12 hours of run time per charge for exceptionally long run time capabi... lities

JBL - EON 1 COMPACT CHARGER

Model: EONONECOMP-CHGR-NA Brand: JBL

Product Features:

• AC Plug: Yes
• Minimum Charging Time: 3.50 Hour
• Maximum Charging Time: 7 Hour

JBL - SRX906LA AF-Array Frame for SRX906LA

Model: JBL-P3231MX Brand: JBL

The SRX906LA AF is a lightweight and compact array frame for suspending SRX906LA arrays. The array frame was designed to work with single-point and front-back suspension methods. For single-point applications, the array frame can be used in conj... unction with the VTX RC500 rotating clamp, allowing smaller SRX906LA arrays to be suspended from standard size trusses or pipes. The two-piece design is comprised of one extension bar and one spreader bar. The extension bar can extend to the front or rear of the frame to accommodate both uptilt and downtilt aiming options. Three connection points are available for attaching the extension bar to the spreader bar, allowing for precise control of shackle positioning for single-point applications. Support for third-party inclinometers is available using the included laser attachment bracket. The two parts can be collapsed easy for storage. For more information about the array frame and use cases, refer to the SRX900 Series Rigging Manual.

JBL - SRX906LA BP- Base Plate for SRX906LA

Model: JBL-P3233MX Brand: JBL

The SRX906LA Base Plate is a universal adapter frame that enables SRX906LA arrays to be ground stacked on top of compatible subwoofers or support structures such as stages, scaffolding, or carts. Using the included M20 screw, the SRX906LA BP con... nects to any supported subwoofer equipped with a standard M20 pole mount adapter, such as the SRX918S or the SRX928S. The rear angle selection bar allows for angles ranging from -15 to +5 degrees. The three included M10 through-holes can be used to permanently attach an SRX906LA array to other support structures. The base plate can be used in conjunction with the Pole Mount (JBL-P3312MX) adapter to pole mount up to two SRX906LA cabinets. Configurations and load conditions for using the SRX906LA BP can be obtained using JBL Line Array Calculator 3 prediction software. For more information about the base plate and use cases refer to the SRX900 Series Rigging Manual.

JBL - SRX910LA AF- Array Frame for SRX910LA, support for up to 16 cabinets

Model: JBL-P3235MX Brand: JBL

The SRX910LA AF is a lightweight and compact array frame used for suspending smaller SRX910LA arrays. The array frame was designed to work with single-point and front-back suspension methods. For single-point applications, the array frame can be... used in conjunction with the VTX RC500 rotating clamp, allowing smaller SRX910LA arrays to be suspended from standard size trusses or pipes. The two-piece design is comprised of one extension bar and one spreader bar. The extension bar can extend to the front or rear of the frame to accommodate both uptilt and downtilt aiming options. Three connection points are available for attaching the extension bar to the spreader bar, allowing for precise control of shackle positioning for single-point applications. Support for third-party inclinometers is available using the included laser attachment bracket. The two parts can be collapsed easy for storage. For more information about the array frame and use cases, refer to the SRX900 Series Rigging Manual

JBL - SRX910LA VT- Vertical Transporter for (4) SRX910LA

Model: JBL-P3236MX Brand: JBL

The SRX910LA VT vertical transporter is a robust, lightweight cart solution for transporting up to four SRX910LA enclosures. The SRX910LA VT measures 30 in (760 mm) wide and 24.5 in (622 mm) deep and comes standard with a hard top (VT TOP) attac... hment that connects to the top cabinet of a stack to create a robust and defined footprint that stabilizes the carts during transportation. Additionally, the VT TOP allows other gear to be stacked on top of it for maximum truck-pack efficiency. Wheel cups are available at the top of the VT allowing stacking for storage. The SRX910LA VT CVR, a reinforced protective cover, is available separately. For more information about the SRX910LA VT and use cases, refer to the SRX900 Series Rigging Manual.

JBL - SRX910LA VT CVR- Vertical Transporter Cover for (4) SRX910LA

Model: JBL-P3237MX Brand: JBL

The SRX910LA VT CVR is a heavy duty soft cover designed to work with the SRX910LA vertical transporter. The cover is sized to cover four enclosures and includes two industrial-rated zippers for easy and reliable deployment. The cover includes in... put panel flaps, allowing the SRX enclosures to be tested without removing the cover. The front section panels are internally reinforced for maximum protection of the speaker grilles. When not used, the SRX910LA VT CVR folds into a compact footprint for storage

JBL - SRX910LA BP- Base Plate for SRX910LA

Model: JBL-P3238MX Brand: JBL

The SRX910LA Base Plate is a universal adapter frame that enables SRX910LA arrays to be ground stacked on top of compatible subwoofers or support structures such as stages, scaffolding, or carts. Using the included M20 screw, the SRX910LA BP con... nects to any supported subwoofer equipped with a standard M20 pole mount adapter, such as the SRX928S. The rear angle selection bar allows for angles ranging from -15 to +5 degrees. The three included M10 through-holes can be used to permanently attach an SRX910LA array to other support structures. Configurations and load conditions for using the SRX910LA BP can be obtained using JBL Line Array Calculator 3 software. For more information about the base plate and use cases refer to the SRX900 Series Rigging Manual.

JBL - SRX900 RC1- Rain Cover compatible with all SRX900 models

Model: JBL-P3239MX Brand: JBL

The SRX900 RC1 is a universal rain cover used for protecting SRX900 amplifier modules from moisture. The rain cover attaches to the amplifier module using the five included M3.5 fasteners and covers the LCD, XLR and etherrCON® connectors. A Velc... ro feature allows easy access to the LCD and connectors, while cover’s flexible material allows it to drape around the connected cables. Once attached, the RC1 is designed to remain on the product; it does not need to be removed for indoor applications. The RC1 should always be used when SRX900 products are used outdoors. Note that the Neutrik powerCON® TRUE1® TOP power connectors are IP65 rated, and do not need to be covered for outdoors use. For more information on how to attach the RC1, refer to the SRX900 Series Rigging and User Manuals

JBL - SRX900LA PB- Pull Back accessory, compatible with all SRX900 LA models

Model: JBL-P3240MX Brand: JBL

The SRX906LA PB accessory is a lightweight pull-back bracket that can be used to implement pull-back of SRX906LA or SRX910LA arrays. The SRX906LA PB attaches to the bottom cabinet of an array and connects to a rear center suspension point to all... ow for more downtilt than would otherwise be possible using an SRX900 Series array frame alone. JBL’s Line Array Calculator 3 software application is used to calculate the required downtilt angle. The SRX906LA PB can support the weight of up to 16 SRX906LA or 16 SRX910LA enclosures (depending on array geometry) and a 1/2-inch shackle (included) can be attached directly to the bracket. For more information about the suspension bar and use cases, refer to the SRX900 Series Rigging Manual.

JBL - SRX918S CVR- Accessory Cover Kit for SRX918S

Model: JBL-P3242MX Brand: JBL

The SRX918S CVR is a heavy duty soft cover designed to work with the SRX918S subwoofers. The front section panels are internally reinforced for maximum protection of the speaker grilles. When not used, the SRX918S CVR folds into a compact footpr... int for storage

JBL - SRX928S CVR- Accessory Cover Kit for SRX928S

Model: JBL-P3244MX Brand: JBL

The SRX928S CVR is a heavy duty soft cover designed to work with the SRX928S subwoofers. The front section panels are internally reinforced for maximum protection of the speaker grilles. When not used, the SRX928S CVR folds into a compact footpr... int for storage

JBL - ACK1-Accessory Caster Kit for SRX900 Series Subwoofers

Model: JBL-P3291MX Brand: JBL

The ACK1 is a universal accessory caster kit used for transportation of compatible JBL products. The kit includes four tour grade casters and the hardware necessary for attachment to the cabinet. The housing and wheels are black for a discreet l... ook even in situations where the rear of the product is facing the audience, as in cardioid subwoofer stacks. Each caster has a load rating of 100 kg (220 lbs), and the wheels are made out black polyurethane. For more information on how to attach the ACK1 refer to the product’s Rigging and User Manuals

JBL - SRX906LA CASE- Flight Case for SRX906LA

Model: JBL-P3311MX Brand: JBL

Product Features:

• Road case for (4) SRX906LA speakers
• Truck-friendly dimensions
• Built-in stacking features for easy storage

JBL - Universal 35mm pole mount adapter

Model: JBL-P3312MX Brand: JBL

Attachable to speakers, base plates, and U-Brackets, the VTX PM is a slip-on universal pole mount adapter for speaker stands and extension rods with a tube diameter of 35 mm. Two M10 comfort grip stud knobs are included for attaching the adapter... to the accessories. For more information about the pole mount adapter, use cases, and safety information, refer to the Rigging Manuals and documentation of the attached accessories.

JBL - PAIR Weather Grille Accessory for Control 12C/T (White) and 14C/T

Model: MTC-14WG Brand: JBL

For Control 10 Series Ceiling Speakers: MTC-14WG (white) fits Control 12C/T and14C/T MTC-14WG-BK (black) fits Control 12C/T-BK and 14C/T-BK MTC-16WG (white) fits Control 16C/T, 26C, and 26CT MTC-16WG-BK (black) fits Control 16C/T-BK ... Non-rusting aluminum, color-matched powder-coated finish for appearance and grille protection Allows Control 10 Series ceiling speakers (and Control 26) to be used in highhumidity applications and in some protected/covered outdoor areas. The MTC-14WG and MTC-16WG high humidity optional grilles address the weakest link when using ceiling speakers in high humidity applications, a steel grille that can rust. High humidity grilles extend the longevity of JBL's Control 10 Series model ceiling speakers - Control 12C/T, 12C/TBK, 14C/T, 14C/T-BK, 16C/T and 16C/TBK - (plus Control 26C and 26CT) when used in such applications. The aluminum alloy material does not rust and the durable powder-coated finish prevents pitting that could otherwise occur with raw unfinished aluminum. The finish provides a nice look that matches with the speaker. The speaker upon which the grille is utilized is intended to be installed in normal ceiling speaker orientation, with the speaker mounted into a horizontal surface (and protected from the bulk of direct weather/water exposure by the overhang of the surface), with the sound projecting downward. To use the grille, simply install onto the speaker instead of the grille that comes with the speaker. Note that care should be taken to press evenly when press-fitting into the speaker so as not to dent the grille via too much pressure concentrated into one location. Pressing closer to the edges is recommended. A scrim is glued to the back of the grille to help break up driving precipitation that might reach the speakers. For painting, do not remove the backing. Paint grille lightly enough to color the grille without clogging the grille backing. For additional rust resistance of the speaker in particularly tough environments, the installer may optionally choose to replace the dog-ear screws with stainless steel or other highly weather-protected screws of the same size and length (the installer should run the dog-ears fully down and back out again prior to speaker installation to avoid the possibility of dogear channel damage)