Atlas - BACKBOX ASSEMBLY

Model: 193-8-6 Brand: Atlas

This Atlas Sound extra deep square protective enclosure furnished with four compound conduit knockouts is a cost-effective assembly that mounts a wide variety of Atlas Sound grilles. Unit features welded CRS construction, black enamel finish and... undercoating to eliminate mechanical and acoustical resonances

Atlas - 19IN Wide Opening Stand-Alone Wall Cabinet with Adjustable Rails

Model: 310-15 Brand: Atlas

The Atlas Sound 310-15 is a wall cabinet that offers 10 RU of rackmount space for network gear and AV equipment. The wall-mount construction helps save you or your organization from taking up too much floor space with your gear. This model offer... s a center depth of 15". Fashioned out of 16-gauge cold-rolled steel, the cabinet comes with three sections: a solid-steel front door, a center section, and a rear door. The cabinet also sports equipment for custom cabinet mounting, wire management, equipment mounting, and structural support. Adjustable 10-32 rack rails are included, as are mounting-rail supports for the center section. The wall cabinet offers organizational boons, such as access holes for harnessing excess wire, and internal open raceways for cable pathways. Punched vents in the center-depth section allow for natural heat dissipation. With reinforced frame flanges, corner-brace structural supports, and electric-welded seams and miters, the cabinet offers both durability and stability

Atlas - BAF 8 IN RN CRS WHT

Model: 51-8 Brand: Atlas

Atlas Sound 51 Series flush-mounting baffles are designed for general purpose, recessed loudspeaker installations. Economical, series is offered in 4" and 8" sizes for standard or torsion spring installation wherever a recessed loudspeaker is sp... ecified including office buildings, retail spaces, and commercial real estate of all kinds.This baffle provides for professional and cost-efficient installation of 8" (203mm) loudspeakers. Loudspeaker mounts to the baffle using standard hardware. The baffle speaker assembly screw mounts (51-8) or torsion mounts (T51-8) to specified enclosures

Atlas - BAF 8 IN RN CRS 2-P WHT

Model: 61-8W Brand: Atlas

Companion Enclosures or Mounting Rings are Available for Loudspeaker Installations With or Without a Tile Bridge Concealed Loudspeaker Mounting Studs Present a Clean Appearance Finished in Textured White Sturdy Two-Piece CRS Construction Attract... ive steel baffles feature concealed loudspeaker mounting studs for easy installation and a clean appearance. Mounts standard 8" (203mm) loudspeakers. Two-piece welded CRS construction (20- gauge trim ring, 22-gauge perforated grille) Finished in textured white

Atlas - General Purpose 8" Steel Baffle Black

Model: 62-8-052 Brand: Atlas

Versatile steel baffles mount standard 8" (203mm) speakers via concealed speaker mounting studs. Construction is one-piece, 24-gauge CRS finished in textured black.

Product Features:

• Companion Enclosures or Mounting Rings are Available for Loudspeaker Installations With or Without a Tile Bridge
• Concealed Loudspeaker Mounting Studs Present a Clean Appearance
• Sturdy One-Piece CRS Construction

Atlas - 8" Round Hole T-Bar Bridge

Model: 81-8R Brand: Atlas

The 81 Series includes three models and can accommodate over 30 Atlas Sound baffles. The 81-8S is designed to mount 8" loudspeakers and has a square cut-out with a multi-position hole pattern to accommodate an extensive variety of round and squa... re baffles including torsion spring and screw mount models. (See chart below for specific baffle model numbers.) Adaptability of the 81-8S also makes it ideal as a stocking item. Model 81-4 features a round cut-out and accepts 4" loudspeaker baffle Models 51-4 and 60-4. Model 81-8R, like the 81-8S, handles 8" loudspeakers but features a round cut-out that suits baffles mounting the industry standard Atlas Sound 95 Series enclosures. All tile bridges are constructed of 24-gauge CRS with an electrogalvanized rust-resistant finish

Atlas - TIL BRG 8" SQ

Model: 81-8S Brand: Atlas

The 81-8S is designed to mount 8" loudspeakers and has a square cut-out with a multi-position hole pattern to accommodate an extensive variety of round and square baffles including torsion spring and screw mount models. Adaptability of the 81-8S... also makes it ideal as a stocking item. Constructed of 24-gauge CRS with an electrogalvanized rust-resistant finish

Atlas - 8" Recessed Round Enclosure 7 inch deep w/fiberglass

Model: 95-8-7 Brand: Atlas

This extra depth model provideS improved low-frequency performance of 8" commercial and professional speakers. Increased volume extends bass response by allowing additional acoustic loading.Unit is perfect for cost-effective applications where e... nhanced audio quality is desired. Enclosure has the same features as the standard 95 and T95 Series with the addition of a 1 1/2" (38mm) thick fiberglass filling having a density of (1 1/2 lbs. per cu. ft.)

Atlas - 8" Flanged Round Enclosure

Model: 96-8 Brand: Atlas

Atlas Sound 96-8 is a cost-efficient cylindrical protective enclosures that mounts a variety of Atlas Sound grilles. Welded CRS construction with painted finish. Units are undercoated and patch-jute lined to eliminate mechanical and acoustical r... esonances

Atlas - ENC 8 IN RN .641C' PLAS FLNG

Model: 96-8-10 Brand: Atlas

Atlas Sound 96 Series are cost-efficient cylindrical protective enclosures that mount a variety of Atlas Sound grilles. All models are of welded CRS construction, have a painted finish, and are undercoated and patch-jute lined to eliminate mecha... nical and acoustical resonances. Mounts Baffle: 51-8, 60-8(W), 61-8W, 62-8, 63-8, 67-8(W), 68-8W, 170-8, G22-8, M222(W), P900, VP-60R, U51-8, U61-8W, U62-8, UG22-8, UM222

Atlas - Replacement Diaphragm for HF Driver in AH12-8 Stadium Horns

Model: AH12-8STDIA Brand: Atlas

Product Features:

• Compatibility: Atlas Sound AH94-8ST Horn System

Atlas - 12" Woofer Replacement for AHXX-12T Stadium Horns

Model: AH12STWOOFER Brand: Atlas

Atlas - SW BOX 6 ROOMS

Model: AST-6A Brand: Atlas

Atlas Sound AST-6A provides for switching control of six loudspeaker pairs, and will accommodate any combination of 8 and/or 16 ohm loudspeakers. This device also features a switch for safe connection of 4 ohm loudspeakers. AST devices include s... eparate on/off controls for each loudspeaker pair and one A-B source selector switch for overall system control. Loudspeaker volume can be adjusted using individual room volume controls. AST-6 provides for switching control of six loudspeaker pairs, and will accommodate any combination of 8 and/or 16 Ohm loudspeakers. Model AST-6 also features a switch for safe connection of 4 ohm loudspeakers. AST devices include separate on/off controls for each loudspeaker pair and one A-B source selector switch for overall system control. Loudspeaker volume can be adjusted using individual room volume controls such as the Atlas Sound DAT-8 or SAT-8 Series (not included). AST-6 has a power handling capacity of 40 watts RMS*/120 Watts audio

Atlas - Adapter CNDT Conn 30W AP SER

Model: BX-1A Brand: Atlas

BX-1A is a vandal resistant cover plate for armored cable and conduit connection. For mounting on APC-30 and APW-30T horn speakers. Constructed of cast aluminum. Threaded for 1/2" pipe thread.

Product Features:

• Device Supported: Speaker
• Features: Vandal Resistant
• Product Material: Cast Aluminum

Atlas - Adapter CNDT Conn AP-15 Series

Model: BX-2A Brand: Atlas

Vandal Resistant Cover Plate for Armored Cable and Conduit Connection on AP-15, AP-15T, and APW-15T Horn Speakers. Constructed of Cast Aluminum. Threaded for 1/2" pipe thread.

Product Features:

• Device Supported: Speaker
• Product Material: Cast Aluminum
• Compatibility:

  AtlasIEDs Horn Speakers:

  • AP-15
  • AP-15T
  • APW-15T

Atlas - Precision, Plate Mounted 250W Attenuator, 1.5dB Steps

Model: E408-250 Brand: Atlas

The E408-250 is specially designed for attenuation in masking and sound reinforcement systems where fine tuning of level control is required. It employs a ten-position, non-shorting rotary switch without stop. The attenuation rate is 1.5dB per s... tep. (All other specifications are the same as the AT Series including the UL listing.

Atlas - 8" Round Hole T-Bar Bridge For Flanged Enclosures

Model: EQ81 Brand: Atlas

Heavy Duty 20-gauge Steel Construction Tile Bridge for 96 series enclosures.

Product Features:

• 20-Gauge Construction
• Designed for Use with 96-8 Series Enclosures
• TAA Compliant: Yes

Atlas - 6" COAXIAL IN-CEILING LOUDSPEAKER WITH 8-WATT 70V TRANSFORMER

Model: FA136T87 Brand: Atlas

Model FA136T87 (U.S. Patent #5206464) is a high-fidelity, coaxial, 6" loudspeaker that delivers 50-watts with full frequency response and wide dispersion. UL listed assemblies are manufactured with high quality materials including reinforced, po... lypropylene woofer and synthetic rubber surround for high-definition bass, structural integrity, effective damping and weather-resistance. Each unit includes a post-mounted dome tweeter with a mylar diaphragm and ferrofluid-cooled voice coil for smooth response and excellent power handling capability. For optimum acoustic and application versatility the Strategy series has been engineered as a system offering both the FA97-6 Series high performance enclosures (.17ft3) with acoustic batting as well as the economy FA95-6 Series (.14ft3) backbox enclosures.The enclosure front-loads the loudspeaker and installs quickly and easily into the ceiling using only a screwdriver to adjust the rotating clamps. Loudspeakers may also be ceiling or wall mounted into areas with minimum depth by using plaster ring Model FAPR-6 instead of an enclosure. Baffle selection includes a choice of two attractive grilles which are equipped with three serrated studs for hardware-free, push-on installation into Strategy Series enclosures. For limited depth installations when no enclosure is required mounting ring model FAPR-6 may be utilized. New constuction ring model FA-TR6 is also available to serve as a pattern cut-out and location marker for drywall installers in new construction applications

Atlas - SQUARE GRILL FOR 6" STRATEGY SPEAKERS

Model: FA170-6 Brand: Atlas

Acoustically matched and treated backboxes allow Strategy Series speakers to perform with optimum resonance-free operation. Standard units include three, easy-toadjust clamps that rotate and secure with a screwdriver into ceilings up to 1 1/4" t... hick. They may also be installed by conventional screw mounting if desired. Models are offered in 4", 6" and 8" sizes in volume and economy versions. Volume Model Series FA97 and Economy Model Series FA95 are 22-gauge CRS, undercoated and equipped with four threaded speaker inserts and three grille-stud receptacles. Both are finished in black epoxy. FA97 Series is lined with 5/16" thick high-density acoustic batting for superior full-range music performance

Atlas - 6" In-Ceiling Coaxial Speaker Motorboard Assembly 32-Watt Transformer

Model: FA63T-8MB Brand: Atlas

Model FA63T-8MB is the entire 6" speaker/ transformer/ selector switch/ front plate assembly found in the FAP63T assembly. The footprint of the FA63T-8MB is identical to a standard FA series 8" speaker component. This footprint allows the motor ... board to fit into all original Strategy Series 8" enclosures in the exact same manner as a regular 8" FA speaker (FA138Txx)